Epoxy Curing Market – Challenges, Key Vendors, Drivers and Trends by Forecast to 2023

Sep 30, 2017

Global Epoxy Curing Agent Market Information-by Type (Amines, Polyamide, Imidazoles, Polymercaptan, Anhydrides, Polymercaptan, and Others), by Application (Adhesive, Coatings, Composites, Electronics, and Others) and by Region - Forecast till 2023

Pune, India - September 29, 2017 /MarketersMedia/ —

Synopsis of Epoxy Curing Agent Market
The Global Epoxy Curing Agent Market is expected to witness a significant growth of USD ~ 5099.32 million by 2023 with CAGR of ~6.8% between 2016 and 2023.

The process of the linear epoxy resin with appropriate curatives to form three-dimensional cross-linked thermoset structures is known as epoxy curing. Curing of epoxy resins is an exothermic reaction and in some cases produces sufficient heat to cause thermal degradation if not controlled. After curing, epoxy resin has excellent properties on mechanical strength, chemical resistance, and electrical insulation.
Furthermore, epoxy curing agent has found in various applications such as adhesive, coatings, composites, electronics, and others. Increase in demand for high performance resin materials of epoxy resin in the various applications such as paint & coatings, composites, and electrical & electronics applications predicted to drive the epoxy curing agent market growth. In addition, the growing opportunities on account of developing domestic as well as commercial market specially in Asia-Pacific and North America has increased the global epoxy curing agent market over the forecasted period. However, environmental regulation in Europe region may be hamper the growth of the epoxy curing agent market.

Key Players
• Evonik Industries AG (Europe),
• BASF SE (Europe),
• Huntsman International LLC (US),
• Cardolite Corporation (US),
• Kukdo Chemical Co., Ltd. (South Korea),
• Aditya Birla Chemicals (India),
• Mitsubishi Chemical Corporation (Japan),
• Momentive Specialty Chemicals Inc. (US),
• The Dow Chemical Company (US),
• Air Products and Chemicals, Inc. (US),
• Others.

Request a Sample Copy @ https://www.marketresearchfuture.com/sample_request/3133

Commenting on this report, an analyst from Market Research Future (MRFR)’s team said, “Global Epoxy Curing Agent Market size is expected to grow at USD ~ 5099.32 million by 2023. The market witnessed a significant growth over the forecasted period owing to growing applications such as into into adhesive, coatings, composites, electronics, and others (Wind Energy, additives, etc.) across various industries.

Taste the market data and market information presented through more than 50 market data tables and figures spread in 110 numbers of pages of the project report. Avail the in-depth table of content TOC & market synopsis on “Global Epoxy Curing Agent Market Research Report- Forecast to 2023

North America is the strong region which holds second position in global epoxy curing agent market, including countries such as U.S., Mexico and Canada. Growth in this region is credited to the increasing consumption of end user industries such as marine and automotive industry particularly, in U.S. and Canada. Companies are investing in R&D to renovate new products for varied range of applications. In addition, an investment of US$ 1.6 billion through Dow chemical in R&D was used to improve the epoxy technology and offer a huge range of high quality of epoxy curing agent products

If you have any special requirements, please let us know and we will offer you the report as you want.

For further information on this report, visit @ https://www.marketresearchfuture.com/reports/epoxy-curing-agent-market-3133

The global epoxy curing agents market is observing high growth with increasing demand from the APAC region, particularly from China and India due to the healthy demand for durable, high performance, and the cost-effective nature of epoxy curing agents. These properties are driving growth in the use of epoxy curing agents in various application industries, such as coatings, adhesives, electronics, and composites.

Segment Analysis
The global epoxy curing agent market has been segmented into type and applications. On the basis of type, the market has been divided amines, polyamide, imidazoles, polymercaptan, anhydrides, polymercaptan, and others (thiols, Dicyandiamide, Photo- and ultraviolet-curing agents, etc.). Among all these types, amine based epoxy curing agents has cover the largest share in global epoxy curing agent market. The main features of amine based epoxy curing agents include chemical resistance, thermal resistant, and weather-ability. The major applications of amine based curing agents include adhesives, and electrical and electronics, composites, coatings, and others.

About Market Research Future:
At Market Research Future (MRFR), we enable our customers to unravel the complexity of various industries through our Cooked Research Report (CRR), Half-Cooked Research Reports (HCRR), Raw Research Reports (3R), Continuous-Feed Research (CFR), and Market Research & Consulting Services.
MRFR team have supreme objective to provide the optimum quality market research and intelligence services to our clients. Our market research studies by products, services, technologies, applications, end users, and market players for global, regional, and country level market segments, enable our clients to see more, know more, and do more, which help to answer all their most important questions.

Contact Info:
Name: Akash Anand
Email: Send Email
Organization: Market Research Future
Address: Magarpatta Road, Hadapsar,
Phone: 6468459349

Source URL: https://marketersmedia.com/epoxy-curing-market-challenges-key-vendors-drivers-and-trends-by-forecast-to-2023/241681

For more information, please visit https://www.marketresearchfuture.com

Source: MarketersMedia

Release ID: 241681

More News

GISBH: KPWKM prioritises swift reunification of rescued children with families

GISBH: KPWKM prioritises swift reunification of rescued children with families

Oct 15, 2024

KUALA LUMPUR: The immediate return of children rescued during Op Global to their parents and families is a top priority for the Ministry of Women, Family and Community Development (KPWKM). However, its minister, Datuk Seri Nancy Shukri said KPWKM must first ensure that the children’s parents and families can provide adequate and proper care. “For cases where the capability of the parents and families is clearly established, the reunification process can proceed without delay. In more complex situations, intervention programmes will be implemented to ensure the children’s and families’ best interests are safeguarded “The ultimate goal is to reunite these children with their families. However, before this can happen, several factors need to be carefully evaluated. This is not about denying anyone’s rights, but about ensuring the best interests of the children are upheld,” Nancy said during a minister’s briefing session on GISB Holdings Sdn Bhd (GISBH) in the Dewan Rakyat today. As of yesterday, 560 children – 283 boys and 277 girls – had been placed in safe custody after the Social Welfare Department (JKM) obtained a temporary court custody order for two months under Section 25(2)(a) of the Child Act 2001. Meanwhile, Nancy said the Task Force Profiling Team for Op Global found that 94.3 per cent of the 558 profiled children had at least one living biological parent, while 5.7 per cent had no parents or no available information on their parents. Health assessments showed that 51.6 per cent of the children were underweight, falling below the healthy Body Mass Index (BMI), while 46.1 per cent had a normal weight and the remaining children were classified as obese, she added. “Three children have been issued persons with disabilities (PwD) cards, while 27 others display symptoms of disability,” she added. Cognitive assessments were also conducted on 385 children aged seven and above, with 71.9 per cent (277 children) showing no signs of cognitive disorders, she said. “However, 20.26 per cent (78 children) displayed moderate cognitive disorders, while 7.79 per cent (30 children) were found to have severe cognitive impairments,” Nancy said.

Investigations ongoing into incident of empty Johor checkpoint counters with green lights on, blocked pathways

Investigations ongoing into incident of empty Johor checkpoint counters with green lights on, blocked pathways

Oct 15, 2024

PETALING JAYA: A surprise inspection by Johor Public Works, Transport, Infrastructure, and Communications committee chairman, Mohamad Fazli Mohamad Salleh recently found 17 Immigration counters at the Johor checkpoint empty. The inspection was conducted following a video circulating online showing the 17 empty counters at the checkpoint in Sultan Abu Bakar Complex (KSAB), triggering public backlash. He confirmed that the surprise inspection found that the incident actually occurred, Harian Metro reported. The video showed the empty counters, with green lights on however, the pathways were closed off to commuters. ALSO READ: Woman calls out Immigration officer for alleged rude behaviour Fazli then instructed that the green lights to be turned off to indicate that the lane is closed, to ensure no one is confused. “If there is no solid reason given regarding the incident, this can be considered intentional,” he was quoted as saying. On the other hand, Johor Immigration director Datuk Mohd Rusdi Mohd Darus said an internal probe will be conducted on the incident. ALSO READ: Woman expresses gratitude to Johor Immigration officers for returning lost RM1.5k “The internal investigation will determine whether the immigration officer handling the counter neglected their duties or intentionally left the counter without permission. “We will not tolerate this behaviour, and strict disciplinary action will be taken against them if they are found to have neglected their duties. “It is a violation of responsibility, and I take this issue seriously,“ he was quoted as saying.

Malaysia should seize opportunity in global medical devices market - Chang

Malaysia should seize opportunity in global medical devices market - Chang

Oct 15, 2024

KUALA LUMPUR: Malaysian innovators and manufacturers should seize the opportunity to tap into the immense potential of the global medical devices industry, which is projected to reach nearly US$800 billion by 2030, says Science, Technology and Innovation (MOSTI) Minister Chang Lih Kang. Chang noted that Malaysia had many high-quality products and innovators in the medical devices sector, with the government continuously encouraging and supporting industry players in research and development (R&D) and commercialisation efforts. “The market is vast, and we have plenty of room for success. To support R&D, of course, not limited to the medical devices industry, MOSTI offers various funding facilities, grants, matching grants, and equity where we invest in relevant startups,” he said. Chang said this to reporters after officiating the soft launch of INNOMed: Innovation Pitching Powered by PERANTIM, a key event in the International Medical Device Exhibition & Conference (IMDEC) 2024. Also present were Medical Device Authority (MDA) chief executive officer Dr P. Muralitharan, Malaysia Medical Devices Manufacturers Association (PERANTIM) president Johari Abu Kasim, and organising chairman of INNOMed, Dr Hyzan Mohd Yusof. Earlier in his speech, Chang said that under Malaysia’s New Industrial Master Plan (NIMP) 2030, the government aimed to foster synergies between the manufacturing and engineering sectors and the medical devices sector. This includes creating advanced inspection tools, solutions for imaging and endoscopy, implantable devices, and minimally invasive surgical tools. Meanwhile, Muralitharan told Bernama that, according to figures from the Department of Statistics Malaysia (DOSM), Malaysia’s total trade in medical devices, valued at RM25.61 billion from January to July this year, increased by 23.5 per cent compared to the same period in 2023 (RM20.74 billion). He added that the export of medical devices was valued at RM20.15 billion, an increase of 25.7 per cent compared to RM16.02 billion in 2023. In his speech, Dr Hyzan said that medical device innovation presented an opportunity to improve healthcare while boosting the economy, with the industry projected to reach nearly US$2 billion by 2025, making it one of the fastest-growing sectors. “By focusing on innovation, we can create high-skilled jobs, reduce our dependence on imported technologies, and position Malaysia as a global leader. Last year, we spent US$5 billion on medical devices, with 95 per cent being imports. Our goal is to reduce this to 50 per cent within five years,” he said. He also emphasised that close collaboration among universities, innovators, manufacturers, clinicians, and government agencies was key to ensuring that ideas and research transitioned smoothly from laboratories to clinical applications and into the hands of healthcare providers. INNOMed, themed “Unleashing the Power of Medical Technology: Shaping the Future of Healthcare,“ is organised by the MDA and will take place from Dec 10 to 12 at the Kuala Lumpur Convention Centre (KLCC).

YOUR NEWS, OUR NETWORK.

Do you have Great News you want to tell the world?

Be it updates about your business or your community, you can make sure that it’s heard by submitting your story to our network reaching hundreds of news sites across 6 verticals.

Utara Selatan

Bringing you from Utara to Selatan, we publish travel guides to make sure you will discover new places to visit in Malaysia and try all the local delicacies.

Newsletter